Electricity is a type of energy that is in constant movement. To be more precise little particles that are called electrons are in constant movement. This process creates electricity.  Electric current is measured in amperes, called amps for short. You might have seen this on your electrical devices. Many interesting facts have to be mentioned. Here are some of them that we think you might enjoy.

Electricity travels at the speed of light more than 186,000 miles per second!

LED light bulbs use about one-sixth of the electricity that conventional bulbs do, cost about a quarter as much to use, and lasts about 40 times longer.

 As an example of how much more efficient modern appliances are, a fridge from the mid-80s, 30 years ago, used four times as much electricity as a modern one

Electric fields work in a similar way to gravity. Whereas gravity always attracts, electric fields can either attract or repulse.

We hope you enjoyed it!

The post What is electricity itself? appeared first on Franco's Electric.

Clean energy operates by producing needed power without having negative environmental impacts such as the release of greenhouse gasses like carbon dioxide. Local governments can dramatically reduce their carbon footprint by purchasing or directly generating electricity from clean, renewable sources.

The most common renewable power technologies include:

• Solar (photovoltaic, solar thermal)
• Wind
• Biogas (e.g., landfill gas/wastewater treatment digester gas)
• Geothermal
• Biomass
• Low-impact hydroelectricity
• Emerging technologies – wave and tidal power

Generating energy that produces no greenhouse gas emissions from fossil fuels and reduces some types of air pollution. Diversifying energy supply and reducing dependence on imported fuels. It Creates economic development and jobs in manufacturing, installation, and more.

The post Have you ever heard about clean electricity? appeared first on Franco's Electric.

Once you call to speak with a person responsible for understanding what type of problem you have, they get your information and try to find the best time available to schedule an appointment. This usually processes where the customer is present as well and is very important to make sure the communication is effective and none of the information is missed. As from the side of customers do not hesitate to give all the information you have regarding the problem, even if you think it might not be important. Once the customer hangs up the process this is where all the magic happens. The whole information is transformed and entered into the system, which is translated for the electrician. The timing for the scheduling is double-checked and now the communication with the call center and electrician happens where the electrician has to gather information on what type of tools or parts might be needed for this job and if any need to be ordered or purchased. Before arriving at the customer’s house the electrician has to have everything needed. Once a Work order is created and the electrician is done with the work there is, even more, to go through such as managing the estimate and sending it out or giving the customer an invoice. The whole information is transformed and entered into the system, which is translated for the electrician. It is pretty complex and interesting to understand how much of a work is behind every single job.

The post Electricians in Fort Myers…! appeared first on Franco's Electric.

The reason why they cannot be fully trusted is the fact that they present additional tripping and fire hazards. The point is that they are not meant to be used full-time and can be temporary solution. In the long run it is way better and safer to have additional electrical outlets installed. When you do use electrical cords, make sure they are inspected before each use to ensure they are not damaged. If you see your extension cord is damaged or hot to the touch, be sure to dispose of it right away.

The post Dangers of extension cords…! appeared first on Franco's Electric.

It will save you from unwanted accidents when it is raining.

• Select the right kind of outdoor outlet.
  National Electrical Code REQUIRES the use of ground fault circuit interrupter (GFCI) outlets for safety. Only this type of outlet is safe for outdoor use.
• Ensure proper installation.
  Be sure to install the outlet with a gasket and a cover plate, sealing the connection to the wall, or attaching a weatherproof cover.
• Add a weatherproof cover.
  The little flip-up tabs that cover your outdoor electrical outlets are only enough to protect the outlet when it’s NOT in use. Luckily, the addition of a properly connected weatherproof cover can allow you use of the plug while safeguarding it against moisture – even allowing for use in the rain. Sometimes referred to as ‘flip up’ or ‘bubble covers,’ these outlet additions are now mandatory as per the National Electrical code

The post Outdoor Outlets…! appeared first on Franco's Electric.

The post Avoid Drilling around Light Switches and Sockets…! appeared first on Franco's Electric.

The post Electrical Wiring…! appeared first on Franco's Electric.

It is much better to unplug them to prevent overheating, overloading, or surging stand by electrical power. When the users don’t use the appliances, the electricity keeps flowing, and it is called standby power. Unplugging appliances that are not used will stop stand by power and save you electricity and can reduce your electric bill.

Extension cords can be a trip hazard and can overload a circuit, you should avoid using extension cords except in periodic situations. If you do find that you regularly uses an extension cord, such as to reach a corner lamp, then consider calling in a licensed electrician to install more accessible outlets.
If you ever have to deal with electrical issues, always cut the power at the breaker box. Before you start work, test to make sure the outlet, fixture, or switch is shut off. Then plug something in, flip the switch, and use a tester. It will only take a few seconds to cut the power and test the circuit. But we would still suggest not to touch anything as you can make the problem even worse and let professionals do their job.

The post Live in a Safer Environment…! appeared first on Franco's Electric.

The post Dangers of electrical outlets…! appeared first on Franco's Electric.

It’s crucial that you find a secure platform to stand on while you work. This can be a chair, table, step ladder or otherwise. The important thing is that you should be able to stand on it without it rocking or tipping to any big extent.

Working from the light bulb replacement guide above, choose a replacement that either matches the old bulb or is more appropriate. An important part of this decision is in choosing a power rating to match your fitting.

The post Ever Tried to Change a Lightbulb Yourself…? appeared first on Franco's Electric.